|
|
Vertical Coalescer Separators
for EI 1581, Category C, Type S, 5th Edition
Facet VCS Series two-stage vertical coalescer separator housings
are mechanical devices designed to filter solids and separate
two immiscible liquids. They have been qualified after full-scale,
witnessed testing to the Fifth Edition of EI Bulletin 1581.
RELIABLE PERFORMANCE
Facet coalescer separators are a result of over 50 years of continuous
research and development to meet the ever demanding performance
requirements in the aviation fuel handling industry. This, along
with proven field performance, demonstrates Facet’s ability
to provide quality products that meet current specifications as
well as specific customer requirements for installations in refineries,
bulk storage terminals, heliports, airports, etc.
|
|
|
|
• Welded carbon steel construction––other materials
available on request
• ASME Code, Section VIII construction, stamped and certified
• Design pressure: 150 PSI at 250° F — other pressures
available on request
• Inlet, outlet and drain connections permanently marked
• Choice of rod or screw base coalescer cartridge mounting
styles
• Interior: Epoxy coated (MIL-PRF-4556)
• Exterior: Prime coated
• Swing bolt head closures
• Buna-N o-ring closure seal
• Knife edge cartridge mounting seals
• Headlift furnished on 18" (457 mm) OD and larger
• Spider plate attached to vessel wall
• Sloping cartridge plate
• 4" inlet/outlet cleanout/inspection connections (when
permitted by design)
• Connections provided for options listed below
• *
Automatic air eliminator with check valve
• * Pressure relief valve
• * Differential pressure
gauge
• Pilot control valve
• Pilot tester
• Water slug control valve
• Electrical water-level alarm |
|
• Water drain valves
• Liquid level gauge
• Blind cover for pilot control mounting flange
• Immersion heaters
• Sampling probe
• Working platform and ladder |
(* Mandatory for 5th Edition)
Top
|
|
