|
|
Vertical Coalescer Separators
for EI 1581, Category M, Type S, 5th Edition

Category M Coalescer Separator housings are for Military JP-8
or JP-5 fuel. Type S qualifications can be used at all filtration
points in an aviation fueling system. Type S is meant to be used
at filtration points where significant levels of water and dirt
in the product can be expected. Facet VCS Series Vertical Coalescer
Separator housings fully comply with EI 1581, Category M, Type
S requirements.
RELIABLE PERFORMANCE
Facet coalescer separators are a result of over 50 years of continuous
research and development to meet the ever demanding performance
requirements in the aviation fuel handling industry. This, along
with proven field performance, demonstrates Facets ability
to provide quality products that meet current specifications as
well as specific customer requirements for installations in refineries,
bulk storage terminals, heliports, airports, etc.
|
|
|
|

Welded carbon steel constructionother materials
available on request
ASME Code, Section VIII construction, stamped and certified
Design pressure: 150 PSI at 250° F other pressures
available on request
Inlet, outlet and drain connections permanently marked
Choice of rod or screw base coalescer cartridge mounting
styles
Interior: Epoxy coated (MIL-PRF-4556)
Exterior: Prime coated
Swing bolt head closures
Buna-N o-ring closure seal
Knife edge cartridge mounting seals
Headlift furnished on 18" (457 mm) OD and larger
Spider plate attached to vessel wall
Sloping cartridge plate
4" inlet/outlet cleanout/inspection connections (when
permitted by design)
Connections provided for options listed below
*
Automatic air eliminator with check valve
* Pressure relief valve
* Differential pressure
gauge
Pilot control valve
Pilot tester
Water slug control valve
Electrical water-level alarm |
|
Water drain valves
Liquid level gauge
Blind cover for pilot control mounting flange
Immersion heaters
Sampling probe
Working platform and ladder |
(* Mandatory for 5th Edition)
Top
|
|