|
|
Horizontal
Coalescer Separators
for FIXED INSTALLATIONS
— API-1581, Category C, Type S, 5th Edition
Facet HCS Series (end opening) two-stage horizontal coalescer
separator housings are mechanical devices to filter solids and
separate water from fuels where water content is a problem. They
have been qualified after full-scale, witnessed testing to the
Fifth Edition of API Bulletin 1581.
|
|
|
RELIABLE PERFORMANCE
Facet coalescer separators are a result of over 50 years of continuous
research and development to meet the ever demanding performance requirements
in the aviation fuel handling industry. This, along with proven field
performance, demonstrates Facet’s ability to provide quality
products that meet current specifications as well as specific customer
requirements for installations in refineries, bulk storage terminals,
heliports, airports, etc. |
|
• Welded carbon steel construction––other materials
available on request
• ASME Code, Section VIII construction, stamped and certified
• Design pressure: 150 PSI at 250° F — other pressures
available on request
• Inlet, outlet and drain connections permanently marked
• Interior: Epoxy coated (MIL-C-4556)
• Exterior: Prime coated
• Swing bolt head closures
• Hinged end opening cover furnished on 24" (610 mm) OD
and larger
• Flanged inlet and outlet connections
• Buna-N o-ring closure seal
• Choice of rod or screw base coalescer cartridge mounting
styles
• 4” inlet/outlet cleanout/inspection connections (when
permitted by design)
• Knife edge cartridge mounting seals
• Spider plate attached to vessel wall
• *
Automatic air eliminator with check valve
• * Pressure relief valve
• * Differential pressure
gauge
• Pilot control valve
• Pilot tester
• Water slug control valve |
|
• Electrical water-level
alarm
• Water drain valves
• Liquid level gauge
• Blind cover for pilot control mounting flange
• Immersion heaters
• Sampling probe |
(* Mandatory for 5th Edition)
Top
|
|
