|
|
Horizontal
Coalescer Separators
for MOBIL EQUIPMENT —
API-1581, Category C, Type S & SLD, 5th Edition
|
Facet HCS Series (end opening) two-stage horizontal coalescer separator
housings are mechanical devices to filter solids and separate water
from fuels where water content is a problem. They have been qualified
after full-scale, witnessed testing to the Fifth Edition of API
Bulletin 1581. Using Facet high quality coalescer and separator
cartridges, they provide the best water and solids removal.
|
|
|
RELIABLE PERFORMANCE
Facet coalescer separators are a result of over 50 years of continuous
research and development to meet the ever demanding performance requirements
in the aviation fuel handling industry. This, along with proven field
performance, demonstrates Facet’s ability to provide quality
products that meet current specifications as well as specific customer
requirements for installations in refineries, bulk storage terminals,
heliports, airports, etc. |
|
• Welded carbon steel construction––other materials
available on request
• ASME Code, Section VIII construction, stamped and certified
• Design pressure: 150 PSI at 250° F — other pressures
available on request
• Inlet, outlet and drain connections permanently marked
• Interior: Epoxy coated (MIL-C-4556)
• Exterior: Prime coated
• Swing bolt head closures
• Hinged end opening cover furnished on 24" (610 mm) OD
and larger
• Victaulic inlet and outlet connections
• Buna-N o-ring closure seal
• Choice of rod or screw base coalescer cartridge mounting
styles
• Knife edge cartridge mounting seals
• 4" inlet/outlet cleanout/inspection connections (when
permitted by design)
• Spider plate attached to vessel wall
• *
Water defense system
• * Automatic air eliminator
with check valve
• * Pressure relief valve
• * Differential pressure
gauge |
|
• Pilot control
valve
• Blind cover for pilot control mounting flange
• Sampling probe |
(* Mandatory for 5th Edition)
Top
|
|
