Facet International is the world leader in jet fuel handling, industrial coalescer separators, bilge water separator and other separation technology. Advanced filtration and separation products and systems for aviation, marine, petrochemical, water tretment, power genreation and general industrial markets.

   --Coreless (crushable) Design--

The Facet CIF Series high efficiency pleated paper filter cartridges are designed to effectively remove solid contaminants from fuels.

The filtration of potable liquids is not recommended with this series of filter cartridges.

Media with high efficiency throughout the life of the cartridge is available in ratings from .5 to 5 microns. We recommend replacing cartridges when the differential pressure reaches 15 psi. Effective life above 15 psid is minimal.

All cartridges are 6" (152 mm) outside diameter. To simplify maintenance, we offer one piece cartridges in three lengths: single-length of 141..2" (370 mm), double-length of 283..4" (730 mm) and triple-length of 431..4" (1090 mm). One triple-length cartridge replaces three single-length.

To use the CIF Series cartridge requires the one time installation of either a single, double or
triple-length center tube kit. Each kit contains all necessary hardware and components required to
convert any housing fitted for 6" (152 mm) OD x 3-½ " (89 mm) ID diameter cartridges.

• Crushable—can reduce your disposal volume by approximately 80%
• No metal components
• Incinerable—check your local regulations
• Pleat spacers—designed for maximum utilization of the filter medium
• Flow rates are comparable to other 6" (152 mm) OD cartridges
• Cartridge alignment is executed at top of center tube—easier, quicker
• Lightweight—contributes to reducing changeout time

• Recommended maximum operating temperature: 240°F
• pH range from 5 to 9
• Initial differential pressure: 2 psi (.14 kg/cm2) or less
• Design collapse pressure: 75 psid (5.25 kg/cm2)
• Flow direction: Outside to in

• Constructed with high efficiency pleated paper
• No metal components—end caps and center tubes are engineered plastics
• Gaskets are Buna-N—other materials available by request