Facet International is the world leader in jet fuel handling, industrial coalescer separators, bilge water separator and other separation technology. Advanced filtration and separation products and systems for aviation, marine, petrochemical, water tretment, power genreation and general industrial markets.

Facet filter housings are specifically designed to remove solid particles such as rust, dirt, pipe scale, sand and metal from fuel. They are commonly located ahead of clay treaters and filter separators to protect and prolong cartridge life. A single pass through the filter allows clean product to flow downstream.

Facet filter housings will continuously remove solids from fuel when used with Facet standard single, double or triple-length M Series high efficiency filter cartridges. Housings are designed for easy servicing and low maintenance. All are built to ASME Code, Section VIII, with many standard and optional accessories and connections available to facilitate individual installation requirements. Facet filters provide a complete system to meet industry standards and levels of effluent purity required by commercial airlines, major oil companies and governments worldwide.

M Series filter housings use any of Facet’s Series M high efficiency filter cartridges. A single pass of product through the system removes solids such as rust, dirt, scale, granules and other particles commonly found in liquid process streams.

M Series filter housings are available in three styles in several standard sizes to accommodate specific flow and filtration requirements. They are designed with no internal moving parts to provide easy service and reduced maintenance costs. Each housing is manufactured using quality materials and workmanship to give long-lasting, dependable service.

M Series filter housings can be fitted with either multiple single-length cartridges, stacked 1, 2 or 3 high or their double-length or triple-length equivalents.

• Body: Welded carbon steel construction—other materials available on request
• ASME Code, Section VIII construction, stamped and certified
• Designed for 150 psi @ 250°F—higher pressure and temperature ratings available on request
• Head closures: Style 1—thru-bolt / Styles 2 and 3—swing bolt
• Buna-N closure gasket —other materials available on request
• Rod mount cartridge hardware
• Knife edge cartridge mounting seals
• Headlift furnished on 20" (508 mm) and larger
• Inlet and outlet permanently marked
• Exterior: Prime coated
• Interior: Epoxy coated

• Air Eliminator
• Differential pressure gauge
• Pressure relief valve
• Manual drain valve