Facet 21 and 22 series Fuel-Gard® Monitor Cartridges, CLARCOR

Facet International is the world leader in jet fuel handling, industrial coalescer separators, bilge water separator and other separation technology. Advanced filtration and separation products and systems for aviation, marine, petrochemical, water tretment, power genreation and general industrial markets.

A member of the Purolator Advanced Filtration Group

Download 21 & 22 Series
Spec Sheets
(PDF, 1 pg., 378 K)

21 and 22 Series Fuel-Gard® Monitor Cartridges

The Facet Fuel-Gard® monitor cartridges meet the latest edition of the Institute of Petroleum (I.P.) Specifications and Qualification Procedures—Aviation Fuel Filter Monitors with Absorbent Type Elements.

The cartridge is made up of layered and pleated, multi-media sections with inner support shells and an outer wrap. A special water absorbent media retains water and the pleats expand. As the maximum waterholding capacity is reached, a reduction in flow occurs, indicating the cartridge should be changed. Maximum recommended operating temperature is 160°F at a maximum differential pressure of 180 psi.

• Tested and qualified to meet latest edition of the I.P. Specifications and Qualification Procedures—
Aviation Fuel Filter Monitors With Absorbent Type Elements
• Multi-layered media for increased solids holding, water removal and shutdown protection
• Less than 0.3 mg/liter of solids in effluent
• Less than 1 ppm of water in effluent
• Maximum differential pressure: 180 psi
• Flow direction: Outside to in
• Not adversely affected by exposure to temperatures varying from -65°F to 160°F

• Carbon steel structural components
• Heavy duty metal center tube and outer shell for extra structural strength
• All metal components coated to protect against corrosion
• Standard gaskets are Buna-N—other materials available on request

Top