Facet International is the world leader in jet fuel handling, industrial coalescer separators, bilge water separator and other separation technology. Advanced filtration and separation products and systems for aviation, marine, petrochemical, water tretment, power genreation and general industrial markets.

For maximum water removal, solids holding capacity and
shutdown protection to assure clean, dry fuel.

The Facet GNG Series Go-No-Go military fuel contamination monitor housings are constructed of light weight aluminum, and designed for a maximum working pressure of 150 psi.

Facet’s GNG Series Go-No-Go military fuel contamination monitors meet the latest edition of Military Specification MIL-M-81380C(AS) for Monitor, Contamination, Aviation Fuel Dispensing Systems.

The GNG Series Go-No-Go fuel contamination monitor housings are offered in these styles:

• Model 5: Equipped with five GNG Series military monitor cartridges—for flow rates from 50 to 100 gpm (189 to 378 lpm)—screwed inlet inlet and outlet connections
• Model 20: Equipped with twenty GNG Series military monitor cartridges—for flow rates from 100 to 600 gpm (378 to 2271 lpm)—choice of Victaulic or flanged inlet and outlet connections.

Facet’s 2" (51 mm.) nominal outside diameter GNG Series Go-No-Go military monitor cartridges perform three jobs to assure clean, dry fuel. They absorb free and emulsified water to less than 2 ppm, remove ultra-fine solids, and shut down system flow when hit with a localized slug of water. Flow direction is from the outside to inside at a rate of 1 gallon (3.79 liters) per lineal inch with 2 micron nominal filtration.

• Light weight aluminum body construction—other materials available on request
• Design pressure: 150 psi @ 250°F
• Flow rates: 50 to 600 gpm (189 to 2271 lpm)
• Buna-N closure seal—other materials available on request
• Monitor locating plate
• Installed GNG Series monitor cartridges qualified to MIL-F-81380C(AS)

• Inlet and outlet connections —Model 5: Screwed 1-½ " NPT —Model 20: Choice of Victaulic or flanged 2" to 6" (51 to 152 mm.) • Pressure gauge connection: ¼ " NPT

• ASME Code available on Model 20 housings • Pressure gauge assembly • FG or PS Series monitor cartridges designed and    qualified to latest I.P. Specification