This information was printed from the Facet International web site.
All material is copyrighted and may not be reproduced or reprinted without written permission.
www.facetinternational.com | E-mail: info@facetinternational.com

Facet International is the world leader in jet fuel handling, industrial coalescer separators, bilge water separator and other separation technology. Advanced filtration and separation products and systems for aviation, marine, petrochemical, water tretment, power genreation and general industrial markets.

 
 | 
 | 
 | 
 | 
 | 
A member of the Purolator Advanced Filtration Group  
 
 

Download Housings
Spec Sheets
(PDF, 2 pgs., 222 K)

 

    3 AGB Series Vertical Housings
     (For Facet AGB series air/gas coalescer and separator cartridges)

The Facet 3 AGB Series vertical housing permits easy access for inspection or change out of media. The baffle plates at the inlet remove a large amount of solid particulate matter and entrained liquids which are collected in the quiescent sump. The large sump area also provides for slug control.
Use of the impingement baffle permits coalescer cartridges to function more efficiently in the removal of microscopic solids and the fine liquid entrainment.


Gas stream enter housing at point (A). Through the use of baffling at point (B), impingement of solid particulate matter occurs. A certain amount of liquid entrainment will drop out with solids and collect in quiescent sump. Mist and minute solids will flow upwards and enter coalescer cartridges, points (C). Oil mist particles will be coalesced and solid particulate matter will be removed. Gas stream will flow from inside-out. Coalesced droplets will be repelled by specially treated separator cartridges, point (D). Liquid will fall to bottom. An upper drain connection is available for this liquid to be removed at point (H). Gas stream will flow through separator cartridges (D) outside-in, and on through internal piping to outlet point (E).



• Body: Welded carbon steel construction
• ASME Code, Section VIII, Div. 1, stamped and certified
• Designed for 150 psi (10.5 kg/cm2) @ 250°F
• Exterior: Prime coated
• Swing bolt head closures
• Head-Gasket: Buna-N o-ring — other materials available by request
• Head lift furnished on 20" (508 mm) OD and larger

• Inlet and outlet: 150#RF (ANSI) flanged
• All other connections are 3000# NPT couplings		    


• Differential pressure gauge
• Automatic drain valves
• Liquid level gauge
Top
Select your market for product information: INDUSTRIAL | ENVIRONMENTAL | AVIATION | POWER GENERATION | PETROCHEM | MARINE | MILITARY
Company Info | Tools & Calculators | Dowloads & Technical Info | Request Quote | Contact Us | Home Screen | Site Map