|
 Facet
SuperFlex housings are small, economical, carbon steel housings
that may be used as filters, filter separators or air/gas separators
depending on the cartridges used. Stainless steel construction
is available. Contact your Facet Representative for details.
LIQUID FILTRATION
MS Series SuperFlex Filters remove solids from liquids, compressed
air or natural gas. Facet’s M Series (high efficiency, screen
wrapped or multipleated) cartridges, stacked 1, 2 or 3 high, are
used.
LIQUID-LIQUID SEPARATION
VCS Series SuperFlex Filter Separators remove water and solids from
gasoline, diesel fuel, fuel oil, insulating oil, kerosene, lube
oils, solvents and many other petroleum based products where water
content is a problem. This housing requires Facet Model CC-23-7
or CC-23C coalescer cartridges and Model CS-94 or CS-94C pleated
paper separator cartridges, stacked 1, 2 or 3 high.
AIR/GAS SEPARATION
AGS Series SuperFlex Air/Gas Separators remove oil, water, mist
and solids from compressed air or natural gas. This housing requires
Facet Model CC-23-7 coalescer cartridge and Model CS-98-2 pleated
paper separator cartridge.
|
|
• Welded carbon steel construction
• ASME Code, Section VIII, Div. 1, stamped and certified
• Designed for 250 psi (17.57 kg/cm²) @ 250°F
• Main closure: Blind flange
• Head gasket: Buna-N o-ring—other materials available
on request
• Vent connections: ¾" NPT
• Drain connections: ¾" 3000# NPT
• Inlet and outlet connections: 2" 3000# NPT
• Interior: Epoxy coated
• Exterior: Shop primer
|
