Facet International is the world leader in jet fuel handling, industrial coalescer separators, bilge water separator and other separation technology. Advanced filtration and separation products and systems for aviation, marine, petrochemical, water tretment, power genreation and general industrial markets.

MAS Series, Facet Coalescent Plates Separators are designed to treat hydrocarbon water. These separators can be fed by gravity or pumped. These separators carry out separation by physical means, do not require consumables and have no mobile parts. Therefore, no maintenance is needed and its operation is free of failures.

FACET MPak® double-corrugated coalescent platesare installed inside of the separators. These plates are mounted in modular packs, and have an adjust device against the side of the vessel that ensures that all the flow to be treated goes through the Plates.
The optimal working range temperature of Plate Packs MPak® is 4 to 98 ºC (40 to 208 ºF).

Each separator of the MAS Series can be equipped with adjustable skimmers to withdraw separated hydrocarbons. Optionally, they can also be provided with a storage chamber to accumulate separated hydrocarbons.

• Class I separators according EN-858, effluent less than 5 ppm
• Outlet security device
• Access covers Class C250 according EN-124
• MPak® plate packs: frame in steel and plastic hardware media
  is oleophilic polypropylene
• Clean plate packs in place — no need to remove from unit
• 3/4", 1/4" or 1/2" MPak® coalescing plate spacing
• Computerized effluent predictions for accurate sizing

• Vault made of prefabricated reinforced concrete
• Separator hydrostatically tested for 1/2 hour
• Covers constructed from cast iron Class C250 according EN-124

• Oil skimmers
• Oil storage tank
• Oil pump control station includes pump and motor, control
  panel, high and low level float switches
• Automatic warning device for light liquid Ex(i) execution