|
Facet pump-out systems can be custom configured to pump either
the water from the separator, the oil from the separator, or both.
Various types of electric and pneumatic pumps are available.
Facet pump control systems can be custom designed for virtually
any control logic, or connections can be provided for use with a
customer provided control system.
SELF PRIMING CENTRIFUGAL PUMP
If used as an oil pump, the pump is usually controlled by an automatic
control system that includes a level switch in the oil holding tank.
If a water pump-out system is provided, the water pump would normally
be controlled by a level switch in the effluent side of the separator.

Controls oil pump when energized by level switches or manual
operation
Controls water pump when energized by level switches or manual
operation
Energizes high level alarm light or provides signal for remote
alarm.

Oil pump, water pump, or both
Available in either NEMA 4 or NEMA 7 electrical configurations
Oil or water high or low level alarms with contact for remote
alarm (by customer)
|